Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterNikro HVAC Cleaning in Aurora: What to Know First
CleanRun Air Duct Cleaning Aurora provides independent Nikro HVAC cleaning for homeowners across Aurora, from the older ranch homes near Aurora Hills Golf Course to newer builds along the E-470 corridor. Most Nikro evaporator coil and blower cleaning jobs are completed in a single scheduled visit, with a written flat price delivered before any panel comes off. We do not quote per-vent teaser rates or negotiate after arrival. If you own a Nikro air handler and need the coil, blower, or heat exchanger cleaned, call (720) 513-5159 for a free written estimate. Tomas Reyes and our crew will show you the photo first, then we talk about what comes next.
How Nikro Products Fail - and How We Fix Them
Nikro builds solid commercial-grade extraction and air-moving equipment, but their HVAC components see predictable failure patterns in Aurora’s high-plains climate. The dry winters and summer dust storms from the eastern prairie load particulate into systems faster than coastal or mountain markets. Here’s what we find on Nikro jobs:
- Nikro 862 Series portable air scrubbers: The blower motor bearings cake with fine concrete dust and drywall particulate on Aurora restoration sites. The motor draws higher amperage, overheats, and trips thermal protection. We pull the blower assembly, clean the stator and housing with compressed nitrogen and soft brushes, replace the bearings with quality aftermarket SKF equivalents, and test running amps against the nameplate. OEM bearings are available but carry a 3-week lead time; the SKF units meet the same RPM and load specs.
- Nikro 220V negative air machines: The evaporator-style cooling coils in these units develop hard water scale from Aurora’s municipal supply, which runs 140-180 ppm calcium hardness depending on the season. Scale insulates the coil, raises head pressure, and reduces airflow. We descale with a foaming cleaner formulated for aluminum fin stock, then apply a corrosion inhibitor safe for the fin coating. Rinse pressure stays under 400 PSI to protect the fin bond.
- Nikro HEPA filtration add-on modules: The pleated media loads fast in Aurora’s spring dust season (March through May). Restricted airflow causes the bypass damper to stick partially open, recirculating unfiltered air. We replace the media with Nikro-specified MERV-17 equivalent or OEM, clean the damper track, and verify seal compression with a smoke pencil. The module’s gasket set is a wear item most owners miss.
- Nikro gas-fired heat exchanger bundles: In the 150,000 BTU range common in Aurora commercial retrofits, the clamshell exchanger develops soot scaling when combustion air is drawn from a dusty mechanical room. We remove the burner assembly, inspect the exchanger with a borescope, media-blast the fireside surfaces with walnut shell at low pressure, and reassemble with new manifold gaskets. Cracked exchangers are documented with photos and flagged for replacement per Haven Standard Clause 4: Safety-First Documentation.
- Nikro refrigerant line sets in package units: The suction line insulation degrades in Aurora’s intense UV at 5,400 feet elevation, faster than at sea level. Moisture ingress at the insulation gap causes acid formation in the POE oil. We strip and replace the insulation, pull a deep vacuum to 500 microns, and recharge by weight. The acid test is standard on every Nikro refrigerant job; if TAN reads above 2.0, we recommend a filter-drier replacement and oil change.
Our Nikro HVAC Cleaning Process
- 1
Schedule and scope: You call (720) 513-5159, speak to a live person, and describe the Nikro unit, model if known, and symptoms. We schedule a diagnostic visit with a flat trip fee that applies to the work if you proceed.
- 2
On-site diagnostic with documentation: Our technician arrives in uniform, introduces themselves by name, and inspects the Nikro system. We photograph the coil, blower, or heat exchanger condition before touching anything. The camera showed a 3-inch debris build-up at the first elbow on a recent job in Tollgate Overlook.
- 3
Written price under Haven Standard Clause 1: You receive a single flat price for the complete cleaning or repair, with line items for parts if needed. OEM Nikro parts are quoted alongside quality aftermarket alternatives where applicable. No work begins until you approve in writing.
- 4
Cleaning and repair: We use Nikro-compatible methods: negative-pressure extraction with Rotobrush rotary agitation for duct-connected components, foaming cleaner for coils, and nitrogen-blow or media-blast for heat exchangers per manufacturer fin-spacing specs. All disassembly is photographed.
- 5
Testing and photo record delivery: Running amps, static pressure, temperature split, and combustion analysis (where applicable) are recorded. After photos are taken of every cleaned component. The complete photo record and test results are delivered as your standard job record.
- 6
365-Day Done Right Promise activation: The written guarantee is included with your invoice. If the work is not right, we make it right. This is backed in writing, not subject to manager approval.
BeforeAfterWhat Nikro HVAC Cleaning Costs in Aurora
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Nikro evaporator coil cleaning | $280 - $420 | Coil accessibility (A-coil vs. slab), fin corrosion level, refrigerant recovery required |
| Nikro blower motor and housing cleaning | $220 - $340 | Single-speed vs. ECM motor, bearing replacement needed, squirrel-cage balance |
| Nikro heat exchanger cleaning | $380 - $560 | Number of burner passes, soot depth, gasket replacement, combustion re-certification |
| Nikro condenser coil cleaning | $180 - $280 | Coil fin density, oxidation level, protective coating reapplication |
| Nikro full air handler service (coil + blower + housing) | $520 - $740 | Unit size (2-5 ton), plenum condition, filter rack repair, photo documentation scope |
These are whole-system flat prices, not per-vent or teaser rates that balloon on arrival. The price you approve is the price on the invoice. Call (720) 513-5159 for a free written estimate; we’ll put our number next to any competitor’s quote under our Free Second Opinion policy.
Why Aurora Homeowners Call CleanRun Air Duct Cleaning Aurora for Nikro Work
We’ve cleaned Nikro equipment in Aurora since 2013, and we’ve documented every job. The 365-Day Done Right Promise means the work is accountable long after the truck leaves. Our technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews, and they arrive knowing Nikro’s commercial-grade quirks, not just residential HVAC basics. When a Nikro part is obsolete or back-ordered, we also service Lennox, Trane, and Carrier systems, so we can advise honestly on repair-vs-replace without being captive to one brand’s parts pipeline. Every call is answered by a live person, 24/7. Tomas Reyes oversees the Aurora territory personally; he learned the mechanical trades at Bronx Community College and has run CleanRun jobs from Aurora Hills to the E-470 corridor for several years now.
FAQs
No, professional cleaning by an independent service provider does not void your Nikro warranty, provided the work follows manufacturer specifications for coil fin pressure, chemical compatibility, and electrical safety. CleanRun Air Duct Cleaning Aurora is not affiliated with or authorized by Nikro; we document our methods so any warranty claim remains supportable. Call (720) 513-5159 if you need our procedure documentation for your warranty file.
You know because we photograph the part packaging and the installed component, and both images are included in your standard job record. When quality aftermarket parts make more sense due to availability or cost, we quote both options in writing under Haven Standard Clause 1 and note the manufacturer and part number on the invoice. You approve before installation.
Replace when the heat exchanger is cracked, the compressor has failed, or repair costs exceed 40% of replacement value on a unit over 12 years old. Clean otherwise. We document the condition with photos and test data, then give you both numbers in writing. Our Free Second Opinion applies to replacement quotes from other contractors. Call (720) 513-5159 to schedule.
A single evaporator coil or blower cleaning takes 2-3 hours on site. A full air handler service with coil, blower, and housing runs 4-5 hours. We schedule the arrival window, not rush the work. The photo record and testing are included in that time; they are not extra steps.
The $79 coupon model typically sends a shop-vac and a brush through the register closest to the truck, with no panel removal and no photo documentation. We remove the plenum access, clean every duct run with negative-pressure extraction and rotary agitation, and deliver before-and-after photos of your actual ducts. The flat price covers the full scope, not a teaser that triples once the crew is inside. Call (720) 513-5159 for our written estimate; the comparison will be clear.
Written by Tomas Reyes, Owner & Lead Technician, CleanRun Air Duct Cleaning Aurora at CleanRun Air Duct Cleaning Aurora, serving Aurora and nearby areas.