Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterVent Cleaning in Aurora, CO
Dryer Vent Cleaning services in Aurora typically run $99-$199 for a standard single-story vent run, completed in one visit with a written price delivered before any work starts. If your dryer is taking two cycles to dry a full load, or the exterior cap is visibly clogged with lint, that’s the vent telling you it needs attention – not next month, but soon. CleanRun Air Duct Cleaning Aurora has been documenting and cleaning vent systems since 2013, and every job ends with a photo record of the duct interior, before and after, so you can see exactly what changed.
This page covers the vent cleaning service specifically – what it involves, what we find inside Aurora homes, what it costs, and how the process works from first call to final photo. If you want the full picture of everything we do with dryer exhaust systems, the Dryer Vent Cleaning in Aurora page covers vent inspection, bird nest removal, booster fan service, and re-routing work as well.
To get a written price before any work starts – no “call for a quote,” no estimates after the truck arrives – call (720) 513-5159. A live person answers every call.
When You Need Vent Cleaning
Aurora’s housing stock spans a wide range: 1980s ranch homes in Havana Street corridors, newer construction in Saddle Rock and Tallyn’s Reach, and mid-2000s builds throughout the Southlands area. The vent systems in these homes vary just as widely – some are short, straight runs to an exterior wall; others snake through multiple floors, around HVAC equipment, and through finished ceilings before reaching the outside. Lint accumulation is a function of run length, number of elbows, and duct material, not age alone. These are the signs we see most often before a cleaning job:
- Drying cycles are running long. A full cotton load should dry in 35-45 minutes. If you’re regularly running a second cycle, restricted airflow from lint buildup is the most common cause – not a failing heating element.
- The dryer cabinet is hot to the touch after a normal cycle. When exhaust can’t exit efficiently, heat backs up into the drum and cabinet. In Aurora’s dry climate, that buildup can happen faster than homeowners expect, especially in homes with longer vent runs through interior walls.
- You haven’t had the vent cleaned in over 12 months. NFPA 211 and most appliance manufacturers recommend annual cleaning. Aurora homes with households of three or more people often need cleaning every 9-10 months given typical laundry volume.
- Lint is visible around the exterior cap or the cap flap doesn’t open fully when the dryer runs. Bird nests are a specific issue in Aurora’s older neighborhoods near Highline Canal – we find them in vent caps on exterior walls more often than most homeowners expect, and a blocked cap creates the same restriction as a full lint clog.
- A burning smell comes from the dryer area during a cycle. Lint is combustible. A burning odor is not a minor inconvenience – it’s a warning that accumulated lint is getting close to the heating element. This is the point where a technician, not a DIY brush kit, needs to handle the cleaning.
- You’ve just moved into a home built before 2010. Plastic accordion-style flexible ductwork was common in Aurora builds through the 1990s and into the 2000s. These materials accumulate lint in their ridges more aggressively than smooth rigid metal duct and may need replacement, not just cleaning.
Our Vent Cleaning Process
The work follows the same documented sequence on every job – same crew qualifications, same equipment, same photo record. Here’s what happens from the moment our technician arrives:
- Written scope and price, confirmed before anything moves. Under Haven Standard Clause 1, the written price is delivered before any panel comes off and before any equipment is connected. You’ll know the total, in dollars, before we begin. No adjustments after the fact unless you approve a scope change in writing.
- Pre-cleaning camera inspection and photo documentation. We run a camera into the vent run from the dryer connection point and photograph what’s inside – lint accumulation depth, any blockages at elbows, the condition of the duct material, and the state of the exterior cap. This is the “before” record. If the camera shows something unexpected – a crushed duct section, a disconnected joint, a bird nest – you see the photo before we quote any additional work.
- Negative-pressure extraction with rotary brush agitation. Negative-pressure extraction means we create a controlled vacuum draw through the duct system so that dislodged lint moves toward the collection point rather than into your laundry room. The rotary brush – run with Nikro or Rotobrush equipment depending on duct diameter and configuration – breaks up compacted lint at the duct walls and at elbows, which is where accumulation is densest. A shop vacuum pushed into the opening, which is what many “$79 coupon” operators use, does not generate sufficient airflow to clear a run longer than 6-8 feet effectively.
- Exterior cap cleaning and function test. The cap flap is cleaned, the damper is checked to confirm it opens under airflow and closes under pressure, and any debris at the cap face is removed. In Aurora, we regularly find that builders installed fine-mesh bird screens over exterior caps – these are actually a fire hazard, as they trap lint fast and are not approved for dryer exhaust terminations under current IRC standards.
- Post-cleaning airflow verification. We measure airflow at the exhaust termination point and compare it to the nameplate rating on your dryer. A cleaned duct should restore airflow to within manufacturer spec. If it doesn’t, we document why – crushed duct, an extra elbow that wasn’t disclosed at quote, or a failing booster fan – and give you a written explanation with options.
- After photo documentation, delivered to you. The same camera run from step two is repeated. You receive photos of the interior after cleaning alongside the before images – a side-by-side record of what the vent looked like, and what it looks like now. This is a standard deliverable on every CleanRun job, not an add-on, and it’s been that way since our first job in 2013.
Every technician operating under the H.A.V.E.N. Standard is background-checked, uniformed, and identified by name before arrival – Haven Standard Clause 3: Verified Crews. You’ll know who is coming before the truck pulls up.
BeforeAfterVent Cleaning Pricing in Aurora
How Much Does Dryer Vent Cleaning Cost? (2026 Price Guide) - Aurora, CO depends on three things: run length, duct configuration (number of elbows, vertical rises, and transitions), and whether the vent terminates at an accessible exterior wall or routes through a rooftop cap. Here are the ranges we see most often in Aurora homes:
| Scenario | Typical Price Range |
|---|---|
| Standard vent cleaning (up to 15 ft, 1-2 elbows, exterior wall termination) | $99 – $149 |
| Extended run (15-25 ft, 3+ elbows, or second-floor dryer) | $149 – $199 |
| Rooftop cap termination (common in Aurora townhomes and condos near Fitzsimons) | $179 – $249 |
| Cleaning plus bird nest or debris blockage removal | $149 – $275 |
| Cleaning plus replacement of prohibited flex duct section (per linear foot) | Quoted separately in writing |
Every price above is written and confirmed before work starts. There is no version of a CleanRun job where you find out the total after the technician has finished. That’s Haven Standard Clause 1, and it applies without exception.
If you’ve received a written estimate from another company, CleanRun will put its own number next to it in writing at no cost – a Free Second Opinion on any written estimate. Bring the competitor’s quote to the call and we’ll give you a written comparison before you commit to anything.
Call (720) 513-5159 for a written price – free, no obligation, and delivered before any work is scheduled.
What We Actually Find Inside Aurora Dryer Vents
Aurora’s climate plays a specific role in how dryer vents accumulate debris. The city averages around 300 days of sun per year, which means low humidity for most of the year – and low-humidity air carries more suspended lint per cubic foot of airflow than humid air does. In practice, that means lint settles further into duct runs here than in comparable homes in wetter climates.
In the Tallyn’s Reach and Saddle Rock neighborhoods, where homes tend to run 3,000-4,000 square feet with laundry rooms on upper floors, we regularly find 2-3 inch lint packs at the first elbow below the transition from the dryer to the wall duct. That elbow sits inside the wall cavity, invisible from the laundry room and unreachable with a standard consumer brush kit.
In the older Aurora neighborhoods along South Peoria Street and near the Aurora Hills Golf Course, the more common problem is damaged duct material – the plastic accordion flex duct that was standard in those builds has typically degraded, creating ridges where lint packs hard. In those cases, cleaning extends the service life, but we’ll document the duct condition in the photo record and note in writing whether replacement is advisable.
Near the Fitzsimons campus and the newer Aurora City Center corridor, townhomes and attached condos often have rooftop terminations – a configuration that requires ladder access and specific cap hardware. Lint at a rooftop cap is a more acute risk because it’s less visible to the homeowner and goes longer without attention. We’ve found rooftop vent caps in Aurora with multiple seasons of lint compaction that had essentially stopped venting altogether.
Why the Documentation Matters
The photo record isn’t a marketing feature. It’s the only way to prove that vent cleaning actually happened – and that it happened to the standard you paid for.
A technician who connects a hose at the dryer end, runs a shop vacuum for 10 minutes, and hands you a receipt has no way to show you what was removed or whether the duct walls are clear. A before photo from a camera at the duct interior, and an after photo from the same position, does. The debris is visible in the before image. The cleared duct wall is visible in the after. There’s no ambiguity.
CleanRun has documented every job with interior duct photos since 2013. Over 52,000 homes served, every one with a written price before work started and a photo record when the crew left. That’s not a policy subject to technician judgment – it’s the baseline for every visit, backed by the 365-Day Done Right Promise in writing.
The 365-Day Done Right Promise means exactly what it says: if the work is not right within 365 days of the job, we make it right. It’s written on every job record, not stated in marketing copy. You can read it before agreeing to any work.
For the full scope of dryer exhaust system services – including inspection, re-routing, and booster fan work – see our home page for everything CleanRun covers in Aurora and the surrounding metro area.
FAQs – Vent Cleaning in Aurora
How much does dryer vent cleaning cost in Aurora, CO?
Dryer vent cleaning in Aurora costs between $99 and $249 for most homes, depending on run length, number of elbows, and whether the vent terminates at an exterior wall or a rooftop cap. A standard run of up to 15 feet with one or two elbows and a wall cap typically comes in at $99-$149. Longer runs, rooftop terminations, or blockage removal push the price higher. CleanRun delivers a written price before any work starts – call (720) 513-5159 for your number, free and with no obligation.
How often should I have my dryer vent cleaned in Aurora?
Once per year is the baseline recommended by NFPA 211 and most dryer manufacturers. Aurora households doing five or more loads of laundry per week, or homes with vent runs longer than 15 feet, often need cleaning every 9-10 months. The most reliable indicator isn’t a calendar – it’s drying time. If a full cotton load takes more than 45 minutes, the vent is worth inspecting.
Can I clean my dryer vent myself?
Consumer brush kits sold at hardware stores can clear lint from the first 3-5 feet of a duct run – the section immediately behind the dryer. Beyond that, especially at elbows and through-wall sections, they don’t generate enough agitation or airflow to move compacted lint to the exterior. For vent runs longer than 8 feet, or any run with more than one elbow, a rotary brush system with negative-pressure extraction does the actual work. Attempting to clear a longer run with a consumer kit often pushes lint further into the duct rather than out of it. High-tension duct components and rooftop cap access also carry real fall and equipment risks – these are jobs for a trained technician.
What’s included in a CleanRun vent cleaning job?
Every vent cleaning job includes a written price before work starts, a Dryer Vent Inspection with interior photos, rotary brush agitation with negative-pressure extraction using Rotobrush or Nikro equipment, exterior cap cleaning and function test, post-cleaning airflow verification, and a documented photo record of the duct interior before and after – delivered to you as part of the standard job record. The 365-Day Done Right Promise is written on every job. There are no add-on fees for the documentation or the guarantee – both are part of the CleanRun baseline.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Aurora, serving Aurora since 2013.