Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Aurora
Air duct cleaning in Aurora typically runs $380-$780 for a full residential system, with most jobs completed in a single visit and a written price delivered before any work begins. We’re CleanRun Duct Repair & Cleaning, and our crews serve Aurora from our metro dispatch office, carrying equipment that handles everything from standard tract-home ductwork to the irregular gravity-furnace conversions found in older neighborhoods. Call (720) 513-5159 for a free written estimate.
Aurora sits more exposed on the semi-arid High Plains than Denver proper, and its prevailing southwest winds funnel fine prairie dust into homes at rates measurably higher than in more sheltered parts of the metro. That means duct systems here load with particulate faster and require cleaning on shorter cycles. Compounding this, the city’s massive 1970s-1990s tract-home building boom left a large inventory of aging fiberglass-lined ductwork that Colorado’s persistently low humidity has made brittle and friable over 30-50 years. The same accumulated plains dust embeds in deteriorating liner material rather than wiping out cleanly.
Our Air Duct Cleaning team has worked in Aurora since 2013. We know the difference between a standard brush-out and the encapsulation or sealing work that aging Aurora systems actually need.
Why CleanRun Air Duct Cleaning Aurora Is Aurora’s Preferred Air Duct Cleaning Company
We’ve served over 52,000 homes since our founding, every one with a written price before work started and a documented photo record when the crew left. Aurora homeowners make up a significant share of that total, particularly in the Meadowood and Sable Ridge areas where our crews have become familiar with the specific failure patterns of 1970s-1990s tract construction.
Our technicians are background-checked, uniformed, and identified by name before arrival, operating under Haven Standard Clause 3: Verified Crews. Every job in Aurora is backed by the 365-Day Done Right Promise, a written guarantee, not a policy subject to manager approval. If the work is not right, we make it right.
Dispatch and scheduling are coordinated from our Denver office, but crews serve Aurora locally and carry the full equipment roster needed for the area’s diverse housing stock. We don’t quote over the phone with vague ranges. Haven Standard Clause 1 requires a written price delivered before any work starts, every time.
Our Air Duct Cleaning Services in Aurora
Residential Duct Cleaning
Aurora’s dominant housing stock is 1970s-1990s ranch-style and split-level tract homes concentrated in areas like Meadowood, Sable Ridge, and the older sections west of E-470, most with original sheet-metal ducts lined with fiberglass insulation now well past its serviceable life. Our residential cleaning starts with a video inspection to assess liner condition, then uses negative-pressure extraction (a suction system that pulls debris out of the ductwork while containing it) combined with agitation tools sized to the duct run. In Aurora, we regularly find that standard brushing alone embeds dust further into deteriorating fiberglass liner, so we quote encapsulation or liner repair alongside cleaning when the camera shows friable material.
Commercial Duct Cleaning
Aurora’s commercial buildings, from the medical offices near Anschutz Medical Campus to retail spaces along Havana Street, face the same prairie dust loading as residences but with higher occupancy and more complex HVAC configurations. We clean commercial plenums (the central distribution boxes that feed multiple duct runs), rooftop units, and variable air volume boxes using Nikro and Abatement Technologies equipment sized to the system. Every commercial job includes the same documented photo record as our residential work, with before-and-after images of each duct run delivered as part of the standard job record.
Supply Duct Cleaning
Supply ducts carry conditioned air from the furnace or air handler to the registers in each room. In Aurora homes, these runs often show the heaviest dust accumulation at the first elbow (the initial bend where airflow changes direction), precisely where prairie dust enters and settles. Our supply duct cleaning uses Rotobrush agitation with simultaneous negative-pressure extraction, photographing each run before and after. For Aurora’s aging fiberglass-lined systems, we flag liner deterioration that could release fibers into the supply airstream and quote encapsulation when needed.
Return Duct Cleaning
Return ducts pull air back to the furnace for reconditioning, making them the primary intake path for dust, pet dander, and the fine alkaline particulate that Aurora’s open-plains exposure drives indoors. These runs are typically larger and more accessible than supply ducts, but in Aurora’s older homes they often contain the original oversized plenum from a gravity-furnace conversion, with irregular trunk lines that defeat standard cable-and-brush equipment. We hand-tool each offset in these configurations, extending job time but ensuring complete debris removal.
Full System Cleaning
A full system cleaning addresses supply ducts, return ducts, the plenum, and the air handler cabinet as an integrated unit. In Aurora, this is often the appropriate scope once a system reaches 20-30 years of age and accumulated prairie dust has distributed throughout all components. We use professional-grade equipment from Guardsman and Abatement Technologies, and every full system cleaning concludes with a complete photo record showing the condition of each element before and after work.
Video Inspection
Our video inspection service uses a camera-equipped scope to document the interior condition of ductwork before any cleaning commitment. In Aurora, this step is particularly valuable for homes built between 1970 and 1995, where we regularly find fiberglass liner deterioration that changes the scope and price of the job. The video becomes part of the documented record, and we review it with the homeowner before presenting a written price.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Aurora
CleanRun crews carry professional-grade equipment from Rotobrush, Nikro, and Guardsman, brands recognized in the duct cleaning trade for consistent performance and verifiable specifications. We don’t use shop-vac attachments or consumer-grade tools. Aurora customers can look up each manufacturer’s equipment independently and verify what will be used in their home before agreeing to a written price. Our inventory includes agitation tools, negative-pressure extractors, and encapsulation applicators sized to the full range of Aurora housing stock, from standard tract-home ductwork to the irregular configurations found in Hoffman Heights gravity-furnace conversions.
Common Air Duct Cleaning Problems We See in Aurora Homes
- Brittle fiberglass liner in 1970s-1990s tract homes. Colorado’s arid climate has desiccated the fiberglass insulation lining original sheet-metal ducts in Meadowood, Sable Ridge, and west of E-470. Standard brushing drives dust deeper into the friable material instead of removing it. The real fix is often liner encapsulation or replacement, not cleaning alone.
- Accelerated dust loading from prairie wind exposure. Aurora’s open High Plains location receives sustained southwest winds that drive fine alkaline dust through building envelopes faster than in Denver or terrain-sheltered suburbs. Duct systems here accumulate particulate on shorter cycles, and filter changes alone cannot address debris already deposited in the ductwork.
- Gravity-furnace conversions with irregular plenums in Hoffman Heights. Homes built in the 1950s-1960s core often contain converted gravity systems with hand-fabricated trunk lines and oversized plenums. These configurations defeat standard cable-and-brush equipment and require hand-tooling at every offset, extending job time significantly compared to a typical Aurora tract home of the same square footage.
- Wildfire smoke particle infiltration. The metro’s worsening wildfire smoke seasons deposit ultrafine combustion particles deep in duct systems that standard filter replacements cannot address. These particles embed in deteriorating fiberglass liner and redistribute through the home until removed by source extraction.
Pricing for Air Duct Cleaning in Aurora, CO
A typical residential duct cleaning in Aurora runs $380-$580 for a standard system up to 2,500 square feet with accessible ductwork and intact liner. Homes requiring encapsulation or liner repair add $200-$400 depending on the extent of deteriorated material. Full system cleaning including the air handler cabinet and plenum typically ranges $580-$780. Commercial jobs are scoped individually based on system complexity and access.
What moves a job toward the higher end: irregular duct configurations like Hoffman Heights gravity conversions, extensive liner deterioration requiring encapsulation, multiple disconnected runs needing sealing, or systems that haven’t been cleaned in 15+ years and show heavy accumulation at elbows and trunk lines. We present a written price before any work starts, every time, under Haven Standard Clause 1. No per-vent pricing. No post-arrival upsells.
Bring a competitor’s written estimate and we’ll provide a Free Second Opinion, putting our number next to theirs in writing.
We Also Serve Cities Near Aurora
Our crews regularly work in Aurora and the surrounding metro, including Denver, Commerce City, Englewood, and Thornton. Each job carries the same written price guarantee, documented photo record, and 365-Day Done Right Promise regardless of city.
Serving Aurora, CO - Our Local Coverage Area
We’re based in the Aurora area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Aurora
Aurora’s more exposed position on the open High Plains means prevailing southwest winds drive fine alkaline dust into building envelopes at measurably higher rates than in Denver, where terrain and urban density provide some shelter. That dust accumulates in duct systems faster, and Colorado’s low humidity accelerates the deterioration of fiberglass duct liners, creating embedded debris that recirculates until removed by source extraction. A typical Aurora tract home benefits from cleaning every 3-5 years rather than the 5-7 year interval often sufficient in more sheltered locations. Call (720) 513-5159 for a written estimate on your specific system.
Hoffman Heights and similar core neighborhoods contain gravity-furnace conversions with hand-fabricated, oversized plenums and irregular trunk lines that defeat standard cable-and-brush equipment. We also encounter asbestos-containing wrap or mastic in some of these older systems, requiring inspection before any cleaning work begins to avoid creating a health hazard. Without hand-tooling each offset and confirming no asbestos disturbance, cleaning can leave debris trapped and potentially release hazardous material. Our video inspection identifies these conditions before work starts. Call (720) 513-5159 to schedule.
It depends on the degree of deterioration, which our video inspection determines. Moderate friability often responds to agitation cleaning followed by brush-applied encapsulation, sealing the liner surface and preventing fiber release. Advanced deterioration with widespread crumbling or detachment from the duct wall typically requires liner replacement. We were called to a 1978 split-level in Sable Ridge where the homeowner complained of dust blowing from registers every time the blower motor kicked on. Our camera inspection found the original fiberglass duct liner crumbling and several disconnected runs in the trunk line. We used agitation tools and negative pressure to remove the embedded plains dust, then sealed the breaches and encapsulated the failing liner with a brush-applied coating. The result was a dramatic drop in register dust and a system that no longer redistributes liner fibers through the supply and return ducts. We’ll show you the video and present a written price for either scope. Call (720) 513-5159.
Wildfire smoke deposits ultrafine combustion particles, including PM2.5 and smaller, that penetrate standard HVAC filters and embed in ductwork-particularly in deteriorating fiberglass liner where they become trapped and recirculate. These particles are too small for typical residential filtration to capture once distributed throughout the system. Source removal through negative-pressure extraction is required to eliminate them, and a MERV rating upgrade alone won’t address debris already deposited. We document smoke particle loading in our before-and-after photo record. Call (720) 513-5159 for a video inspection and written estimate.
Source removal means physically extracting debris from inside the ductwork rather than treating symptoms with filters, sprays, or sealants applied from the outside. For a typical Aurora job, this involves agitation tools that loosen embedded prairie dust and deteriorated liner material, combined with negative-pressure extraction that pulls the debris into a contained collection system. The camera shows the difference: before source removal, duct walls show visible accumulation; after, the metal or intact liner is clean and photographed. This is the only method recognized by NADCA (the National Air Duct Cleaners Association) as effective for duct cleaning. Call (720) 513-5159 for a written price on source removal for your system.
Ready to see what’s actually inside your ducts? Call CleanRun Duct Repair & Cleaning at (720) 513-5159 for a free written estimate. We’ll show you the video, name the price before any work starts, and leave you with a documented photo record of every duct run-backed by our 365-Day Done Right Promise.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Aurora since 2013.