Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Denver, CO | CleanRun Air Duct Cleaning Aurora
Trane air duct cleaning in Denver typically runs $380-$620 for a complete system on a standard ranch home, with full-home Trane HVAC cleaning including blower wheel and evaporator coil access starting around $520. CleanRun Air Duct Cleaning Aurora provides independent Trane service across Denver - not manufacturer-authorized, which means we diagnose the whole system without brand bias and never blame Trane for airflow problems caused by Denver’s patchwork ductwork or the Front Range’s wildfire-smoke cycles. Call (720) 513-5159 for a written estimate before any work starts.
Why Denver Residents Choose Us for Trane Service
We’ve cleaned and sealed thousands of Trane duct systems across the Front Range, from 1990s XR80 ranches in Lakewood to variable-speed XV systems in new-build Aurora. Trane sales & service is a core part of our work, but we’re an independent shop - not authorized or sponsored by Trane - so we diagnose the whole system honestly and never blame the brand for airflow problems the original install or Denver’s ductwork shortcuts created.
Tomas Reyes, our owner and lead technician, grew up in the Bronx and learned the mechanical trades at Bronx Community College before spending years working HVAC service across the metro area. He’s been running CleanRun’s Aurora territory for several years now, with jobs ranging from older ranch homes near the Aurora Hills Golf Course to newer builds along the E-470 corridor. His reputation comes down to this: he uses a negative-pressure vacuum system and a rotary brush, describes exactly what he pulled out of the plenum, and quotes a flat price in writing before any equipment leaves the truck. We show you the photo first, then we talk about what comes next.
Every job is quoted under Haven Standard Clause 1 - written price before any work begins, no exceptions - and concludes with a Documented Photo Record of every duct run, included as a standard deliverable. Our equipment roster includes Rotobrush, Nikro, Abatement Technologies, Honeywell, Aprilaire, and Guardsman - professional-grade tools you can look up independently before agreeing to a price.
Common Trane Air Duct Cleaning Problems We Solve in Denver
- XV-series variable-speed blower wheels coated with carbon debris. Trane’s XV80 and XV95 two-stage furnaces, plus the XV18 and XV20i heat pumps, pull constant low-stage airflow. In Denver’s wildfire corridors, fine smoke carbon and dust redeposit on the blower wheel and evaporator coil rather than getting trapped at the filter. After the 2020 Cameron Peak fire and the December 2021 Marshall Fire, we saw coated blower wheels in Denver systems within weeks of smoke events.
- Return-air cabinets acting as vacuums for crawl-space debris. Trane’s sealed-combustion and two-stage furnaces rely on clean return air. In 1950s-70s ranch homes across Lakewood, Wheat Ridge, and older Englewood, the original return chase is a framed stud bay or disconnected flex run. The cabinet pulls crawl-space dust, rodent detritus, and blown-in insulation fibers directly into the air stream.
- Aluminum evaporator coils with baked-on dust restriction. XB and XR series coils are prone to dry dust binding in Denver’s semi-arid climate. With roughly 14 inches of annual precipitation, the low humidity keeps dust from agglomerating and washing off naturally. It bakes onto the coil instead, restricting airflow in a way humid-market technicians rarely encounter.
- Heat exchanger rust from Chinook-driven cycling. Older XR80 cabinets in Denver show rust and pitting at inspection ports. The city’s dramatic temperature swings - sometimes 40-60°F in a single day - force systems to cycle far more aggressively than in stable-climate cities. That accelerates condensation cycles on the exchanger.
- ComfortLink II thermostats reporting false airflow faults. The communicating systems on XV18 and XV20i units throw error codes when static pressure climbs from dirty ducts or disconnected returns. We’ve traced “blower fault” alerts to nothing more than a return chase packed with insulation fragments in a 1968 Englewood ranch.
BeforeAfterTrane Service in Denver: What Local Conditions Mean for Your Equipment
Denver sits directly in the smoke corridor of Colorado’s increasingly severe Front Range wildfire seasons. After events like the 2020 Cameron Peak and East Troublesome fires or the December 2021 Marshall Fire in Boulder County, metro homeowners run HVAC systems continuously for indoor air filtration. That drives smoke particulates deep into ductwork where fine carbon debris embeds in existing dust layers and off-gases for months. This post-wildfire duct contamination cycle, unique to the Front Range’s fire geography, creates a seasonal demand spike tied to Colorado’s fire calendar rather than the conventional allergen or heating-startup schedule seen in other markets.
For Trane owners specifically, this matters because variable-speed systems run longer at lower airflow. An XV95 in Stapleton or a XV20i in Lowry will move the same total air volume as a single-stage furnace, but over more hours at reduced velocity. That gives fine smoke particulates more contact time with the blower wheel and evaporator coil, and more opportunity to bypass the filter entirely. We’ve pulled blower wheels from Denver Trane systems that looked like they’d been painted matte gray - that’s not ordinary household dust, it’s carbonized wildfire debris bound with residential particulate. The dry air keeps it mobile. The variable-speed motor keeps it circulating. The result is a contamination pattern you won’t find in a generic Trane service manual.
Trane Models & Products We Service in Denver
We work on the full Trane residential line found across Denver service area homes: XR80 and XR90 single-stage gas furnaces common in 1990s-2000s Aurora and Lakewood ranches; XB13 and XR13 air conditioners paired with those furnaces; XV80 and XV95 two-stage and variable-speed furnaces with matching variable-speed air handlers; and the XV18 and XV20i variable-speed heat pump and AC systems with ComfortLink II communicating thermostats.
We quote genuine Trane OEM blower wheels, coils, and cabinet parts when they’re available, and use quality aftermarket filters, flex duct, and mastic when OEM adds cost without performance gain. On Trane equipment under 15 years old, cleaning and sealing the existing system is almost always the better spend. On 20-plus-year-old XB-series gear with a compromised heat exchanger, we tell homeowners straight that replacement beats another repair. We stock common Trane blower wheels and coil treatments locally for Denver turnaround without waiting on shipping.
Trane Service Pricing in Denver
Standard Trane air duct cleaning in Denver runs $380-$620 for a complete system on a typical ranch or two-story home. Full-home Trane HVAC cleaning with blower wheel and evaporator coil access starts around $520. Duct sealing with mastic and rigid board, common for the open stud-bay returns we find in Wheat Ridge and Englewood, adds $180-$340 depending on linear feet.
What drives the cost: system size, accessibility of the air handler (attic vs. crawl space vs. closet), and whether we find conditions requiring return-chase rebuild or coil removal. Every estimate includes video inspection, the Documented Photo Record, and the written scope under Haven Standard Clause 1. No per-vent pricing. No coupon that triples once we’re on site. Call (720) 513-5159 for an exact quote - estimates are free, and we put the full price in writing before any panel comes off.
Serving Denver, CO - Our Local Coverage Area
We’re based in the Denver area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Trane Air Duct Cleaning in Denver
Yes. The Marshall Fire pushed smoke particulates into Denver’s air basin for days, and those particles entered homes through normal HVAC operation. In Trane variable-speed systems, the extended run times at low airflow allowed fine carbon debris to embed in duct liners and redeposit on blower wheels and coils. If your system ran continuously during that period and you haven’t had duct cleaning since, there’s likely residual contamination. Call (720) 513-5159 - we can camera the system and show you exactly what’s still in there.
Denver’s semi-arid climate keeps dust particles small and mobile rather than letting them clump and settle. Trane XV-series variable-speed air handlers run almost continuously at low stage, giving those particles repeated passes at the blower wheel. After wildfire events, the added carbon debris binds to the wheel surface in layers that ordinary filter changes won’t address. The wheel needs physical cleaning - we pull it, wet-clean it, and document the before and after. Call (720) 513-5159 for a written estimate.
Sometimes. In 1960s Wheat Ridge ranches, the “return duct” is often a framed stud bay between drywall and subfloor, open to the crawl space - not sealed sheet metal at all. Cleaning removes the debris, but sealing with mastic and rigid board is what restores actual airflow. We were called to a 1962 ranch in Wheat Ridge running a Trane XV80 with a ComfortLink II thermostat; the homeowner complained the system couldn’t hold temperature and the filter loaded up in a week. Our video inspection showed the return chase was an open stud bay with blown-in insulation and rodent nesting debris feeding straight into the air handler, and the variable-speed blower wheel was caked with carbon and fiber. We cleaned the full return cavity, pulled the blower and evaporator coil for wet cleaning, sealed the chase with mastic and rigid board, and the system’s static pressure dropped enough that the two-stage furnace stopped running on high stage continuously. Call (720) 513-5159 - we’ll camera it first and show you what we’re dealing with.
We quote genuine Trane OEM blower wheels, coils, and cabinet parts when they’re available and make sense for the repair. For filters, flex duct, and mastic, we use quality aftermarket equivalents that match or exceed OEM performance without the brand markup. We never install a part we can’t explain the origin of. Every component is documented in your job record.
For standard residential use without wildfire exposure, every 3-5 years is typical. After major Front Range fire events - Cameron Peak, East Troublesome, Marshall Fire, or any smoke advisory lasting more than 48 hours - we recommend inspection within 6 months if the system ran continuously. Trane variable-speed systems accumulate debris faster than single-stage equipment due to extended run times. Call (720) 513-5159 and we’ll put an inspection and cleaning schedule in writing based on your specific model and exposure.
Service Areas Near Denver
We run Trane service across the metro core and inner suburbs. Beyond Denver service area proper, we regularly handle Trane service in Aurora - from older ranch homes near the Aurora Hills Golf Course to newer builds along the E-470 corridor - and Trane service in Centennial, plus calls in Stonegate, Greenwood Village, and Glendale. The same written-price-first protocol and Documented Photo Record apply in every zip code.
Book Your Trane Service in Denver Today
Call (720) 513-5159 to schedule Trane air duct cleaning in Denver. A live person answers, we’ll put a technician on your calendar, and you’ll have a written price in hand before any equipment leaves the truck. Every job carries the 365-Day Done Right Promise and the full H.A.V.E.N. Standard, including Haven Standard Clause 3: Verified Crews. Background-checked, uniformed technicians. Before-and-after photos of your actual ducts. No exceptions.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Aurora, serving Denver and the Front Range since 2013.