Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Aurora, CO | CleanRun Air Duct Cleaning Aurora
Air Duct Cleaning in Aurora for Trane systems typically runs $380-$620 for a complete system, with most jobs completed in a single visit. What makes our Trane work here different is the prairie dust load - Aurora’s exposed High Plains position pushes alkaline grit into Trane air handlers faster than in Denver, and we’ve learned to scope every job around liner condition, not just dust volume. Call (720) 513-5159 for a written estimate before any work starts.
Why Aurora Residents Choose Us for Trane Service
We’ve handled enough Trane sales & service across Aurora to know the failure patterns by neighborhood. The XR-series air handlers in Meadowood ranch homes fail differently than the XV variable-speed units in newer E-470 builds, and both fail differently than the converted gravity-furnace systems we find in Hoffman Heights. Our crew is independent - not affiliated with or authorized by Trane - but we’ve rebuilt enough Trane blower decks, cabinet seals, and lined trunks to recognize when a problem is the ductwork, the equipment, or both feeding each other.
Tomas Reyes, our owner, grew up in the Bronx and learned the mechanical trades at Bronx Community College before running HVAC service across this metro area. He’s been handling CleanRun’s Aurora territory for several years now, from older homes near the Aurora Hills Golf Course to newer builds along the E-470 corridor. His approach hasn’t changed: show you the photo first, then we talk about what comes next. Every job gets a written price before a panel comes off, and every duct run is photographed before and after under our 365-Day Done Right Promise.
We stock OEM Trane blower motors, control boards, and coil components for when the cabinet is sound, and we use quality aftermarket filters, mastic, and flex connectors where OEM adds no value. Our equipment roster - Rotobrush, Nikro, Abatement Technologies, Honeywell, Aprilaire, and Guardsman - is named so you can verify it yourself before agreeing to a price.
Common Trane Air Duct Cleaning Problems We Solve in Aurora
- Fiberglass liner shedding into Trane cabinets. Aurora’s 1970s-1990s tract homes in Sable Ridge and Meadowood used fiberglass-lined ductwork that Colorado’s low humidity has turned brittle. The liner crumbles into Trane return plenums, loading blower wheels and evaporator coils with a felt-like mat of fibers mixed with alkaline prairie dust. We remove failed liner, mastic-seal exposed trunk seams, and clean the cabinet components.
- Dry, cracked Trane condensate pans and gaskets. At 5,400 feet with under 15 inches of annual precipitation, Aurora’s aridity desiccates rubber and plastic. Trane cased coils develop gasket failures at the cabinet seam, letting unfiltered plains dust bypass the filter and coat the coil face directly. We replace gaskets with OEM-spec material and clean the coil face with foaming cleaner and low-pressure rinse.
- Variable-speed blowers pulling liner debris. Trane XV-series air handlers run at higher static pressure to maintain airflow. In undersized or leaky return trunks common in Meadowood and Sable Ridge split-levels, that suction pulls friable liner material into the cabinet. We measure static pressure before and after cleaning, and we seal return-side leaks with mastic so the blower isn’t fighting itself.
- Converted gravity-furnace plenum leaks. In Hoffman Heights and older Meadowood sections, 1950s-1960s gravity furnaces were retrofitted with forced-air Trane systems. The original oversized plenum was adapted with hand-fabricated trunk lines that leak openly at every offset. Return-side dust enters unconditioned, coating the heat exchanger and blower compartment. These jobs require hand-tooling at each offset and take longer than standard tract-home cleans.
- Wildfire smoke particle loading. Aurora’s worsening smoke seasons deposit ultrafine combustion particles in duct systems that standard filter changes cannot address. Trane media filters capture what reaches them, but particles settle in duct trunks and recirculate. Our negative-pressure extraction with HEPA filtration removes settled particulate that bypasses normal maintenance.
BeforeAfterTrane Service in Aurora: What Local Conditions Mean for Your Equipment
Aurora sits more exposed on the semi-arid High Plains than Denver proper, and its prevailing southwest winds funnel fine prairie dust into homes at rates measurably higher than in more sheltered parts of the metro. That dust doesn’t just collect - it embeds. The city’s massive 1970s-1990s building boom left thousands of homes in Meadowood, Sable Ridge, and west of E-470 with original fiberglass-lined ductwork that Colorado’s persistently low humidity has made brittle and friable over 30-50 years. So the same accumulated plains dust that would wipe out of a smooth metal trunk instead burrows into deteriorating liner material, creating a composite debris that standard rotary brushing alone cannot fully remove.
For Trane owners, this means two things. First, your air handler’s coil and blower wheel are loading with grit on shorter cycles than the manufacturer spec assumes - the spec was written for temperate, humid-climate conditions, not 5,400 feet on the open plains. Second, cleaning scope has to account for liner integrity. We’ve opened Trane cabinets in Aurora where the blower wheel looked like it was wrapped in felt - not just dust, but dust bonded to liner fibers. We scope most Aurora Trane cleanings around liner condition, not just dust volume, because a clean duct with failing liner will be dirty again in one season.
In a 1978 ranch in Meadowood, a homeowner with a Trane XR air handler called because the blower was howling and the supply registers were puffing grit. Our tech opened the cabinet and found the original fiberglass trunk liner crumbling into the return plenum, coating the blower wheel and evaporator coil in a felt-like mat of liner fibers and plains dust. We hand-tooled the offsets, removed the failed liner, mastic-sealed the trunk seams, cleaned the coil and blower, and the Trane cabinet pulled normal static pressure again with clean supply air at every register.
Trane Models & Products We Service in Aurora
We regularly service Trane XR series split-system air handlers and furnaces - the workhorse line in most Aurora tract homes - along with Trane XB series entry-level furnaces and coils found in builder-grade installations from the 1990s and 2000s. The Trane XV series variable-speed air handlers require more careful static-pressure management, especially in the leaky duct systems common to this market. We also see Trane XR/XL series heat pumps paired with existing duct trunks in homes where the original furnace was replaced but the ductwork wasn’t.
Our parts approach is straightforward: OEM Trane for blower motors, control boards, and coil components when the cabinet is sound. Quality aftermarket for filters, mastic, and flex connectors where OEM equivalents add no value. If a Trane air handler is failing from cabinet rust-through or a cracked coil, we’ll tell you honestly when seal-and-clean makes sense versus when replacement is the better spend. We carry common blower motors and control boards on our Aurora trucks for same-visit resolution when the diagnosis supports it.
Trane Service Pricing in Aurora
Trane air duct cleaning in Aurora runs $380-$620 for a complete system, depending on home size, duct configuration, and liner condition. Here’s how that breaks down:
| Service | Price Range |
|---|---|
| Standard Trane system cleaning (up to 2,000 sq ft, sound liner) | $380-$460 |
| Trane system with liner removal/replacement | $480-$620 |
| Evaporator coil cleaning (add-on or standalone) | $140-$220 |
| Duct sealing with mastic (per trunk line) | $85-$140 |
What drives cost: homes with converted gravity-furnace systems in Hoffman Heights or hand-fabricated trunk offsets take longer. Liner removal adds material and labor. We quote one flat price per system, agreed in writing before work starts - no per-vent pricing, no add-ons once the truck is on your drive. Every estimate includes the documented photo record of every duct run, delivered as part of the standard job record. Call (720) 513-5159 for an exact quote - estimates are free, and we put our number in writing under Haven Standard Clause 1.
Serving Aurora, CO - Our Local Coverage Area
We’re based in the Aurora area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Trane Air Duct Cleaning in Aurora
Usually both. The dust is coming from deteriorating fiberglass duct liner in the return trunk, but the Trane blower is pulling it through the cabinet and distributing it. We inspect the liner first, then the cabinet seals. Call (720) 513-5159 and we’ll scope it with a camera so you can see the source before we quote any work.
Yes - XV-series blowers modulate speed based on static pressure, so we measure pressure before and after cleaning with a digital manometer. Standard cleaning without pressure verification can leave the blower hunting between speeds or overworking. Our Rotobrush and Nikro systems are sized for residential static ranges, and we verify performance before leaving.
These homes may have asbestos-containing wrap or mastic on original ductwork. We inspect before any cleaning begins, and if we suspect asbestos, we halt work and refer you to a certified abatement contractor. The converted gravity-furnace plenums also require hand-tooling at irregular offsets - these jobs take longer than standard cleans. We’ll tell you this during the estimate, not after we’re inside.
Sometimes. A dirty coil restricts airflow and causes freeze-up; cleaning helps. But short-cycling can also stem from an oversized system, failing capacitor, or duct leakage pulling unconditioned air. We diagnose before cleaning - our free second opinion applies to any written estimate you’ve already received. Call (720) 513-5159 to schedule.
Aurora’s higher prairie dust load and lower humidity mean Trane systems here typically need cleaning every 3-4 years versus 5-6 in more sheltered Denver neighborhoods. Homes with failing fiberglass liner may need intervention sooner. We include liner condition in our photo record so you can track degradation year to year. Call (720) 513-5159 for a baseline inspection - estimates are free.
Service Areas Near Aurora
CleanRun serves Aurora service area homeowners across the full metro, with regular Trane work in Trane service in Denver and Trane service in Centennial. We also handle calls from Stonegate, Greenwood Village, and Glendale - anywhere the same High Plains dust and aging tract-home stock creates the same Trane cabinet and duct liner problems we know how to fix.
Book Your Trane Service in Aurora Today
Call (720) 513-5159 to speak with a live person - we answer 24/7. We’ll schedule a free estimate, put the scope and price in writing before any work starts, and deliver a documented photo record of every duct run when the crew leaves. Every job is backed by our 365-Day Done Right Promise and the full H.A.V.E.N. Standard, including Haven Standard Clause 3: Verified Crews. Background-checked, uniformed technicians. No per-vent pricing. No surprises.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Aurora, serving Aurora since 2013.